Industrial Radio Remote Control With Toggle Switches

A toggle switch is a class of electrical wireless industrial switches that are manually actuated by a mechanical lever, handle, or rocking mechanism. Most of the time this types of industrial radio remote control is used to control the huge machines properly.

Nowadays, toggle switches are accessible in different approaches and range. At present, these are used in countless applications. Many are intended to provide the simultaneous actuation of numerous sets of electrical associates. At the same time it is also used to control of large amounts of electric current or mains voltages.

Basically, the word Toggle is a reference to a types of mechanism or joint consisting of two arms, which are almost in line with each other. And also these are connected with an elbow-like pivot.

Toggle switch is functional to a switch with a short handle and a positive snap-action, whether it actually contains toggle devices or not. Apart from a switch where a definitive click is heard, is called a positive on-off switch.

Actually the toggle implies that there are only two probable settings and that you are switching from the present setting to the other setting. A toggle switch is a button that has just two positions.

As an example, light switches that turn a light on or off are toggle switches. On computer keyboards, the Caps Lock key is a toggle switch because pressing it can have two meanings depending on what the current setting is. So if the Caps Lock is already on, then pressing the Caps Lock key turns it off. If Caps Lock is off, pressing the Caps Lock key turns it on.

These wireless industrial controllers are developed for hydraulic crane applications requiring up to twelve radio remote control function. These switch controls with proportional trigger provides variable speed control of hydraulic pump solenoids. Split signal capability allows combined boom movements including 'up and sideways' and 'extend and winch down'.

On the other side, toggle switch controls must be activated first before trigger switch and speed control will work. These weatherproof receivers can be crane mounted and interfaces very smoothly to crane electrical system with OEM style plug-in connector.

It has some particular specifications. These are:

These industrial radio remote control has 902-928MHz Frequency Hopping Spread- Spectrum operation with 100mW transmitter power output. In addition, it has internal PCB mounted Antenna. At the same time the normal range of it is up to 2000 feet with an external receiver antenna.

Not only that, it has 30 hours of continuous use w/audible low battery warning and LED indicator battery life with rechargeable Lithium ion w/12-24DC truck charger supplied.

It has the wiring connections of pre wired to OEM requirements, quick connect plugs available.

It has different programming moods that are called proportional momentary with pressure sensitive speed control, Latched (switch on - switch off) or momentary switch (press and hold to operate).

In addition, it has various systems like power on indication, RF signal indication, and channel output indication.